Wondering how to remove it safely and without damaging your car’s paint job? It’s not as difficult as you might think – but there are a few things to avoid if you want to remove the wrap without any hassle.
Take it from the pros – we’ll walk you through the steps of removing a car wrap safely and provide some tips on how to make the process go more smoothly.
How Are Car Wraps Applied?
Car wraps are typically installed by a professional. While some people attempt the DIY, if you want a smooth, long-lasting finish, you’re best served by going to a professional.
The installer will begin by thoroughly cleaning the car’s surface and then measuring and cutting the wrap to fit the vehicle. They will then remove the backing of the wrap and apply it to the car, using heat and pressure to ensure that it sticks securely in place.
Once the wrap is applied, it’s up to you to keep the wrap in great shape. That includes regular, gentle washing and keeping the wrap for excess sun exposure.
How Are Car Wraps Removed?
Removing a car wrap is a bit more complicated than applying it – but it’s still something that most people can do themselves if they’re careful. If your wrap is in good condition, removal is easier than if it’s started to peel, warp, or disintegrate.
The first step is to remove any of the leftover pieces of the wrap that may be attached to the car.
Next, you’ll need to soften the adhesive so that you can peel the wrap off. This can be done with a heat gun, hairdryer, or simply by briefly soaking the wrap in hot water.
Once the adhesive is soft, you can start peeling the wrap off – but be careful not to peel off any of the car paint off along with it. To avoid pulling up paint, car wraps should only be installed over intact paint. Chipping paint is likely to come off during removal.
Tip: If you’re having trouble removing a stubborn piece of the wrap, try using a plastic razor or squeegee to pry it loose.
Things To Avoid If You Want To Remove Car Wrap Safely
There are do’s and don’ts for removing car wraps safely. Make sure to avoid these things so you don’t cause damage!
– Don’t use too much heat during removal (no more than 120 degrees Fahrenheit) – this can cause damage to the surface of the car and also make the wrap harder to pull off.
– Don’t pull the wrap at the wrong angle, as this can cause the vinyl to delaminate, leaving hard, sticky residue on the car. Instead, pull at a 15-20 degree angle.
– Don’t soak the wrap in hot water for too long – you could damage the paint job or the car’s interior.
– Don’t rip and peel. Try to remove large pieces of vinyl at once.
– Don’t rush! Going slowly will ensure the best removal.
Get Started Removing Your Car Wrap Safely
When you have a new car wrap installed, it’s important to know how to remove car wraps safely. If you don’t remove them properly, you could damage the paint or vinyl on your car.
Removing a car wrap is a bit of a challenge, but it’s something that most people can do themselves if they’re careful. By following the tips in this blog post, you can remove your car wrap safely and without any damage to the paint job. If this seems challenging, you can always.